Part# MAC-007-PSEUL
This UL Listed panel control 4 doors via RFID card access and managed by the easy-to-use Malibu access control module and 4 door controller. It is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output. Mounting magnets are included to accommodate screws and nylon standoffs to allow for mounting various boards/accessories in any metal enclosure or back plane.
**Back up battery not included**
**4 door controller not included**
Power Supply Features
- Input: 115VAC, 60Hz, 3.5A
- Output: 12VDC or 24VDC selectable output
- 6A continuous supply current
- Filtered and electronically regulated output
- Short circuit and thermal overload protection
Battery Backup (battery sold separately)
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails
Supervision
- AC fail supervision (form "C" contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts)
Visual Indicators
- AC input and DC output LED indicators
Temperature
- Operating 0° C to 49° C (32° F to 120° F)
- Storage - 20° C to 70°C ( - 4° F to 158° F)
- Relative Humidity 85% +/- 5%
- BTU/Hr (approx.):
- 12VDC: 37 BTU/Hr
- 24VDC: 74 BTU/Hr
- System AC input VA requirement: 402.5VA
Enclosure
- Wall mount enclosure for indoor use
- Accommodates up to two (2) 12VDC/7AH Batteries
- Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D)
- 1/2" and 3/4" combination knockouts
Mounting Magnet Features
- Customize the metal enclosure or back plane to accommodate power supplies, distribution boards, access controllers and accessories.
- Easy, fast installation saves time and labor – no drilling required
- Can be reused and re-positioned
- Zinc alloy cover eliminates the possibility of EMI/RFI
- 26 lb max strength
- 23.2mm (1”) diameter cup, 6.5 mm hole size
- Includes hardware (screws and standoffs)
Package:
- 1 x Power Supply
- 1 x Panel Enclosure
- 4 x Mounting Magnets
Product Weight (approximate): 7.05 lbs (3.2 kg)
Spec Sheet:
4 Door Controller Extension UL Listed
Installation Instructions
