Access Control Power Supply with Enclosure UL Listed 12vc 6amp
Access Control Power Supply with Enclosure UL Listed 12vc 6amp

Access Control Power Supply with Enclosure UL Listed 12vc 6amp

Part# MAC-007-PSEUL

This UL Listed panel control 4 doors via RFID card access and managed by the easy-to-use Malibu access control module and 4 door controller. It is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output. Mounting magnets are included to accommodate screws and nylon standoffs to allow for mounting various boards/accessories in any metal enclosure or back plane.

**Back up battery not included**

**4 door controller not included**

Power Supply Features

  • Input: 115VAC, 60Hz, 3.5A
  • Output: 12VDC or 24VDC selectable output
  • 6A continuous supply current
  • Filtered and electronically regulated output
  • Short circuit and thermal overload protection

Battery Backup (battery sold separately)

  • Built-in charger for sealed lead acid or gel type batteries
  • Automatic switch over to stand-by battery when AC fails


  • AC fail supervision (form "C" contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form "C" contacts).
  • Battery presence supervision (form "C" contacts)

Visual Indicators

  • AC input and DC output LED indicators


  • Operating 0° C to 49° C (32° F to 120° F)
  • Storage - 20° C to 70°C ( - 4° F to 158° F)
  • Relative Humidity 85% +/- 5%
    • BTU/Hr (approx.):
      • 12VDC: 37 BTU/Hr
      • 24VDC: 74 BTU/Hr
  • System AC input VA requirement: 402.5VA


      • Wall mount enclosure for indoor use
      • Accommodates up to two (2) 12VDC/7AH Batteries
      • Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D)
      • 1/2" and 3/4" combination knockouts

          Mounting Magnet Features

            • Customize the metal enclosure or back plane to accommodate power supplies, distribution boards, access controllers and accessories.
              • Easy, fast installation saves time and labor – no drilling required
                • Can be reused and re-positioned
                  • Zinc alloy cover eliminates the possibility of EMI/RFI
                    • 26 lb max strength
                      • 23.2mm (1”) diameter cup, 6.5 mm hole size
                        • Includes hardware (screws and standoffs)


                            • 1 x Power Supply
                            • 1 x Panel Enclosure
                            • 4 x Mounting Magnets

                          Product Weight (approximate): 7.05 lbs (3.2 kg)

                          Spec Sheet:

                          4 Door Controller Extension UL Listed

                          Installation Instructions