Access Control Extension Panel UL (Up to 4 Doors)
NEW: Now this Module has Mobile Credentials. The mobile credential can be setup with the same access level as a normal RFID card. Download the "Malibu Mobile Credential"app to use your phone for access control. It doesn't use Bluetooth. It's the most simple yet secure mobile credential on the market.
Door Controller Extension (4 Door) UL Listed
Part# MAC-004-ALUL
This UL Listed panel control 4 doors via RFID card access and managed by the easy-to-use Malibu access control module. It is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output. Mounting magnets are included to accommodate screws and nylon standoffs to allow for mounting various boards/accessories in any metal enclosure or back plane.
**Back up battery not included**
Note: Must have the UL Listed 4 Door Controller with Module (MAC-004-ALCM) to use this extension. The 4 Door Controller with Module controls the first 4 doors and this extension allows you to add 4 additional doors either in the same or different location. (Additional multiples of 4 doors require an extension for each set.)
Each door requires a Monthly License Fee Per Door Please be sure to manually add a monthly subscription for each door needed.
Door Controller Features
- PCB board size: 160 x106 mm (6.3 x 4.17 in)
- Case size: 273 x 228 x 65 mm (10.75 x 8.98 x 2.56 in)
- Power Supply: 12V DC 4-7A
- Power Consumption of Circuit Board: < 100mA
- Doors Controlled: 8 doors with MAC-004-ALCM
- Door opening time extending setting: 1-600 seconds (adjustable)
- Operation Temperature: -40℃~70℃ (-40ºF~158ºF)
- Operation Humidity: 10-90 % RH, No Condensation
- Quantity of users: 20,000
- Quantity of Event Buffers(offline): 100,000 event buffers
- Power interruption protection measure: High Speed Memory, Records never lost
- Max Distance from Reader to Controller: 100m or 328ft (suggested distance 80m or 262 ft)
- Max Distance between Controllers: TCP/IP: Depends on net coverage area
- Alarm for door open for extended time, illegal break in, intimidate
- Unlock based on internal and external validation
Power Supply Features
- Input: 115VAC, 60Hz, 3.5A
- Output: 12VDC or 24VDC selectable output
- 6A continuous supply current
- Filtered and electronically regulated output
- Short circuit and thermal overload protection
Battery Backup (battery sold separately)
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails
Supervision
- AC fail supervision (form "C" contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts)
Visual Indicators
- AC input and DC output LED indicators
Temperature
- Operating 0° C to 49° C (32° F to 120° F)
- Storage - 20° C to 70°C ( - 4° F to 158° F)
- Relative Humidity 85% +/- 5%
- BTU/Hr (approx.):
- 12VDC: 37 BTU/Hr
- 24VDC: 74 BTU/Hr
- System AC input VA requirement: 402.5VA
Enclosure
- Wall mount enclosure for indoor use
- Accommodates up to two (2) 12VDC/7AH Batteries
- Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D)
- 1/2" and 3/4" combination knockouts
Mounting Magnet Features
- Customize the metal enclosure or back plane to accommodate power supplies, distribution boards, access controllers and accessories.
- Easy, fast installation saves time and labor – no drilling required
- Can be reused and re-positioned
- Zinc alloy cover eliminates the possibility of EMI/RFI
- 26 lb max strength
- 23.2mm (1”) diameter cup, 6.5 mm hole size
- Includes hardware (screws and standoffs)
Package:
- 1 x Access Control Board
- 1 x Power Supply
- 1 x Panel Enclosure
- 4 x Mounting Magnets
Product Weight (approximate): 7.55 lbs (3.42 kg)